![]() ![]() Now execute this command with the mac address which you noted before wakeonlan 01:02:03:04:05:06 OK now you turn off your first computer and at the second pc you will need to install this: sudo aptitude install wakeonlan You will need a second computer to wake up the first one. Save the above script and give the below command in orfer to see your mac address of your ethernet card – make sure to note the mac address. Save the file and use the sudo chmod 755 wakewol to make it executable, after that go to sudo nano /etc/network/interfacesĪnd at the end add this line post-down /usr/bin/wakewol The third step is to make a small script on the sudo nano /usr/bin/wakewol ![]() Or of you use a graphic environment go to network-manager and add a static ip if you need more information how to do this is easy to find information on the internet. The second step is to declare a static ip to your pc, that is easy you need to edit the sudo nano /etc/network/interfaces ![]() We are interested in the line that says “Supports Wake-on: g” if the end of the line is “g” that means it is support to wake up your pc if it is “d” then you will probably need to buy a new one. Supported link modes: 10baseT/Half 10baseT/FullĪdvertised link modes: 10baseT/Half 10baseT/Full The result of this command must be something like this Supported ports: To find this out install this tool: sudo aptitude install ethtool Before you do anything you will need to know if your Ethernet card supports the ability to wake up your pc. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |